0 itens no seu carrinho de compras

Victron BlueSolar MPPT 150/35 12 V / 24 V / 36 V / 48 V

Victron BlueSolar MPPT 150/35 12 V / 24 V / 36 V / 48 V Victron BlueSolar MPPT 150/35 12 V / 24 V / 36 V / 48 V

Victron BlueSolar MPPT 150/35 12 V / 24 V / 36 V / 48 V

€370,00

Victron

Victron BlueSolar MPPT 150/35 12 V / 24 V / 36 V / 48 V

MPPT charge controller BlueSolar 150/35

  • Battery voltage Automatic selection 12/24/36/48 V (a software tool is needed to select 36 V)
  • Rated load current 35 A
  • Maximum PV power 1a, b) 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W
  • maximum PV open circuit voltage 150 V absolute maximum in colder conditions
  • 145 V in starting and running at peak
  • Maximum efficiency 98%
  • 0,0o1 consumption mA (1 uA)
  • Charging voltage "absorption" Defaults: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
  • Charging voltage "float" Defaults: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
  • Multistage variable load algorithm
  • Temperature compensation -16 mV / -32 mV / -68 mV / ° C

Protection

  • Battery reverse polarity (fuse not accessible by the user)
  • Reverse polarity PV
  • Output short circuit
  • overtemperature
  • Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
  • Humidity 95%, non-condensing
  • Data communication port
  • VE.Direct

See the white paper on data communication on our website

CASE

  • Color Blue (RAL 5012)
  • Terminals 13 mm² / AWG6
  • Type of protection IP43 (electronic components), IP22 (connection area)
  • Weight 1.25 kg
  • Dimensions (HxWxD) 130 x 186 x 70 mm

STANDARDS

  • Safety EN / IEC 62109
  • 1a) If more PV power is connected, the controller will limit the power input to the specified maximum.
  • 1b) The PV voltage must exceed Vbat 5V (battery voltage) to boot the controller.
  • Once started, the minimum PV voltage Vbat + 1V will.